Calculation of oil losses in dampas press in the pressing process of the screw press unit PT. Sumber Bumi Sawit Jadi Jaya

Authors

  • Rosmiati Politeknik Teknologi Kimia Industri
  • Manan Ginting Politeknik Teknologi Kimia Industri
  • Nurlianna Br Tarigan Politeknik Teknologi Kimia Industri

DOI:

https://doi.org/10.61306/ijecom.v1i2.12

Abstract

This research was conducted at PT. Sumber Bumi Sawit Jadi Jaya. Oil losses are the percentage of oil that does not exist or is not included in the next oil processing process but is included in the marine process. The purpose of this study was to determine the percentage of oil loss contained in the dregs of the press using the soxhletation extraction method. Based on the results of the mass balance calculation, the number of components that enter the screw press is 22,401 kg/hour digester and 6000 kg/hour delusional water. The number of components that came out of the screw press were dregs press of 8,400 kg/hour and delution crude oil of 20,001 kg/hour. The results of this study indicate that the oil losses obtained in the pressing process are 4.45% or 373.80 kg/hour. This is in accordance with factory standards where oil losses are 4-6%.

Author Biographies

Manan Ginting, Politeknik Teknologi Kimia Industri

Department of Mechanical Engineering

Nurlianna Br Tarigan, Politeknik Teknologi Kimia Industri

Department of Mechanical Engineering

Downloads

Published

25-11-2022

How to Cite

Rosmiati, Manan Ginting, & Nurlianna Br Tarigan. (2022). Calculation of oil losses in dampas press in the pressing process of the screw press unit PT. Sumber Bumi Sawit Jadi Jaya. International Journal Of Computer Sciences and Mathematics Engineering, 1(2). https://doi.org/10.61306/ijecom.v1i2.12